Main product image
BACK TO PRODUCT CATEGORY
ET-D75LE90
Key Features

World’s Shortest Throw* for 3-Chip DLP™ Projectors

Installation Flexibility

Enables a Wide Variety of Applications in Well-Lit Spaces

By mounting an ET-D75LE95/D75LE90 Ultra Short Throw lens onto a Panasonic 3-Chip DLP™ projector*, throw distances are reduced by as much as 60 % (approximately) in comparison with the ET-D75LE50 Short Throw Lens. The huge space lets users exploit the high brightness and picture quality offered by 3-Chip DLP™ Panasonic projectors in spaces where limitations previously existed.

Fit an ET-D75LE95/ET-D75LE90 lens onto one of our 3-Chip DLP™ projectors and produce a 200-inch-diagonal image at a distance** of just 1.6 m (approximately).

Screen sizes of up to 600 inches diagonal are supported. Exclusive technology inside these lenses opens up new possibilities for imaginative visual presentations.

* See specifications for projectors compatible wit h ET-D75LE95/ET-D75LE90 lens.

** Distance refers to lens tip to screen.

Space-saving Ultra-Short-Throw Lens Delivers High-Brightness Projection

 

Note: Ensure an unobstructed space of at least 500 mm (1 ft. 8 in.) or more is provided between projector’s rear panel and walls or other structures. If installing in an enclosed space, use of a separate air-conditioning or ventilation system is recommended. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.

 

Application Examples

 

The ET-D75LE95/D75LE90 Ultra Short Throw Lens makes it possible to install large projectors in small spaces and employ them in applications where conventional projection is limited. New opportunities arise for digital signage, use in retail spaces, public exhibitions, and more.

 

Large On-floor Image Projection

In order to provide sufficient distance to project large images onto floors, major rigging infrastructure, installation on nearby buildings, or special scaffolding is typically required. The ET-D75LE95/D75LE90 makes it possible to project images of the same size from locations nearer the projection plane, greatly simplifying installation.

 

Projection Mapping

When projecting onto structures that require the unit to be installed close to the projection surface, a short-throw lens alone may not provide sufficient projection distance. By using a projector fitted with an ET-D75LE95/D75LE90 lens and another mounted with an existing optional lens, greater freedom and flexibility of installation is afforded.

Note: Usage restrictions apply outdoors or in highly humid areas. Please consult your dealer for advice on specific installations.

 

Staging

Large-screen projection from ceiling or floor is now possible behind stages where throw distance is limited. A Panasonic 3-Chip DLP™ projector and ET-D75LE95/D75LE90 lens is an ideal combination for enhancing live performances on stage, where high picture quality is demanded.

 

Exhibition and Simulation

Virtual-reality displays can be achieved in exhibition spaces where possibilities for front-projection were limited, thereby increasing the power of attraction. It’s also possible to combine on-wall projection with units under the floor throwing onto the floor surface, or onto the ceiling, wrapping the viewer in a fully immersive graphical experience.

 

Digital Signage for Transport Hubs

Projection of large images becomes a reality in places where front-projection was previously limited. Supporting up to 30,000 lumen-class 3-Chip DLP™ projectors, ultra-short-throw lenses are capable of delivering extremely bright pictures even in well-lit environments.

Note: Please consult your dealer for details on the specifics regarding the installations suggested above.

 

Show more

  • Brochures
Product
Image Data
Marketing
Brochures
Spec Sheets
Technical
Manuals

Service and Support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Specification documents
F Value 2.5
Focal Length (f) 7.5 mm
Lens Shift Capable (Adjustment range is limited. Lens shift is possible with models other than the PT-DS20K/DS20K2/DS12K/RS11K.)
Lens Shift | PT-RQ13K Vertical shift [up: 10%; down: 0%], Horizontal shift [left: 12%; right: 16%]
Lens Shift | PT-DZ21K/DZ21K2/DZ13K/DZ10K/RZ12K Vertical shift [up: 5%; down: 0%], Horizontal shift [left: 6%; right: 6%]
Lens Shift | PT-DZ16K/DZ16K2 Vertical shift [up: 13%; down: 0%], Horizontal shift [left: 12%; right: 14%]
Lens Shift | PT-DW17K/DW17K2/DW11K Vertical shift [up: 18%; down: 0%], Horizontal shift [left: 13%; right: 27%]
Dimensions (W x H x D) 448.5mm x ø154 mm (17-21/32 x ø6-1/16 inches)
Weight Approx 6.5 kg (14.3 lbs)
Applicable Projector [Group A] PT-DZ21K/DZ21K2/DS20K/DS20K2/DW17K/DW17K2/DZ16K/DZ16K2
Applicable Projector [Group B] PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DZ110K/DS8500/DS1100K/DW8300/DW90K
Applicable Projector [Group C] PT-RZ12K/RS11K PT-RQ13K