5,200 lumens Solid Shine laser projector designed for intensive usage and rear-projections for control rooms, surveillance centres, museums and exhibitions.
Solid Shine Laser dependability, DLP™ image quality
Together with the latest 1-Chip DLP™ for detailed WUXGA resolution and new generation solid state laser diodes for high brightness the PT-RZ575 is a perfect projector for intensive usage and rear- projections for control rooms, surveillance centres, museums and exhibitions.
The quartet colour harmonizer wheel mechanism captures a wider colour space than comparable laser projectors, which allows white to be reproduced realistically on the screen. With conventional projectors, it’s difficult to achieve an accurate white balance causing images to appear with a distracting greenish tint. Panasonic’s quartet colour harmonizer eliminates this negative impact by adding an additional yellow segment to the colour wheel to produce whites with unparalleled accuracy for natural and realistic picture quality.
Laser module maintains picture quality for longer use
Thanks to the long lasting dual solid state laser modules, there are no lamps which needs to be replaced. The image colours and brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality preserves longer.
Dynamic light control delivers better contrast
The PT-RZ575 directly modulates laser power output to achieve a high contrast with low power consumption. A digitally controlled frame-by-frame scene-linking modulation ensures highly precise output adjustment, while the accurate 20,000:1 contrast ratio is delivered even when bright and dark scenes are frequently interchanging.
Detail clarity processor 3 - Sharpness in the finest details
This unique Panasonic circuit optimises the sharpness of each image based on the super high, high, medium and low frequency components of the extracted image information. The resulting images are expressed with natural and convincing realism.
Dust-resistant airtight optical block
The optical block of the PT-RZ575 is airtight, ensuring consistent, long-lasting image quality for up to 20,000 hours* without maintenance. The optical block design passed stringent testing to assure utmost realiability in environments with up to 0,15mg of particulate matter per cubic meter*2 . The structure prevents brightness degration from dust intrusion.
Long Life mode offers up to 10 years maintenance free
In environments where full grightness is not necessary, such as survaillance, control- and simulation-rooms, constatn operation modes extend light-source replacement up to 87.600 hours*2 in Long Life Mode 3 - about 10 years of 24/7 operation with consistent brightness and colour.
Built-in Short-Throw Lens with powered focus and lens shift
The PT-RZ575 incorporates short-throw lens ideal for rear projection in dedicated rear-projection rigging boxes. With this lens, projection distance is approx. 1.2m to produce a 70-inch diagonal wide-screen image. Powered focus adjustment is done with a remote controller, which is convienient for box installation. Furthermore, lens shift is also powered to shift images position vertically and horizontally.
Single-cable Digital Link control and video connection
Upward HDBaseT™ compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150m. Add an optional Digital Link switcher (ET-YFB200) or Digital Interface Box (ET-YFB100) to further simplify installation in large venues while reducing cost and improving reliability at the same time.
Screen adjustment for specially shaped screens
Horizontal, vertical and corner keystone correction adjusts the image shape for clear visibility when projecting off-axis or from an unsual angle. Curved screen correction allows for the projection of natural and disortion-free images onto curved or cylindrical surfaces.
Edge Belnding and Colour Matching
Adjoining edges in a multi-screen system can be blended to create a smooth and seamless image. Slight cariations in the colour reproduction of individual projectors can be corrected in multi-screen applications.
Click an icon to find out more about the technology used
- Download image - 957.31 KB
- Download image - 28.55 KB
- Download image - 7.36 MB
- Download image - 4.91 MB
- Download image - 6.07 MB
- Download image - 5.98 MB
- Download image - 9.67 MB
- Download image - 528.49 KB
- Download image - 5.58 MB
- Download image - 388.43 KB
- Download image - 6.13 MB
- Download image - 540.87 KB
There are currently no key services available.
There are currently no other services available.
|Power Supply||AC100 - 240V 50Hz/60Hz|
|Power Consumption||500W (520VA) NORMAL: 375W ECO: 350W SILENT: 350W LONG LIFE1: 220W LONG LIFE 2: 185W LONG LIFE 3: 160W SHUTTER: 40W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft), ICE627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [ON] 0.5 W with STANDBY MODE set to ECO*1, 10 W with STANDBY MODE set to Normal (22 W with STANDBY MODE in AUDIO SETTING set to ON andQUICK STARTUP function disabled, 50 W with QUICK STARTUP function enabled)|
|BTU Value||Max 1,706 BTU|
|Lens||Fixed-Focus Lens (0.8:1), Auto focus, F 1.75, f 11.9 mm|
|Light Source||Laser Diode Laser class 1 Luminance life for set: 20,000 hours at half luminance (NORMAL/SILENT)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (2,297ft), Dust: 0.15mg/m3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3)|
|Screen Size||1.02 - 7.62 m (40-300 inches)|
|Brightness*2||5,200 lumens (Center)*2/ 5,000 lumens*2 (NORMAL) 4,160 lumens (Center) / 4,000 lumens (ECO/SILENT) 2,200 lumens (Half luminance) / 1,600 lumens (Constant luminance) (LONG LIFE1) 1,700 lumens (Half luminance) / 1,300 lumens (Constant luminance) (LONG LIFE2) 1,300 lumens (Half luminance) / 1,000 lumens (Constant luminance) (LONG LIFE3)|
|Contrast*2||20,000:1(full on/full off, dynamic contrast ON)|
|Resolution||1920 x 1200 pixels|
|Scanning Frequency | HDMI/DVI-D||fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz 525i (480i)*3, 625i (576i)*3, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 400) - WUXGA (1920 x 1200) compatible with non-interlaced signals only|
|Scanning Frequency | RGB||fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz|
|Scanning Frequency | YPBPR (YCBCR)||525i (480i): fH 15.75 kHz; fV 59.94 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz|
|Scanning Frequency | Video/S-Video||fH: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Optical Axis Shift||Vertical: -4.4%, +4.4(powered) Horizontal: -2.1%, +2.1%(powered)|
|Installation||Ceiling/ oor, front/rear, 360 degree free installation|
|Terminals | Computer 1 In||D-sub HD 15-pin (female) x 1 R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G) HD/VD, SYNC: TTL, high impedance, positive/negative automatic Y, PB, PR Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms|
|Terminals | Computer 2 In/1 Out||D-sub HD 15-pin (female) x 1 R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G) HD/VD, SYNC: TTL, high impedance, positive/negative automatic Y, PB, PR Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | DVI-D In||DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only|
|Terminals | HDMI In 1/HDMI In 2||HDMI 19-pin x2, Deep Color, compatible with HDCP, Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)|
|Terminals | Video In||Pin jack x 1, 1.0 Vp-p, 75 ohms|
|Terminals | Audio In 1||Pin jack x 2（L-R） 0.5 Vrms, input impedance: 22 kilohms or more|
|Terminals | Audio In 2/Audio In 3||M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more|
|Terminals | Variable Audio Out||M3 x 1 (monitor out, stereo) 0-1.80 Vrms, variable, output impedance: 2.2 kilohms or less|
|Terminals | Serial In||D-Sub 9 p x 1, for external control (RS-232C compliant)|
|Terminals | DIGITAL LINK/LAN||RJ-45 x 1, for network, DIGITAL LINK connection (HDBaseT™ compatible), 100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP|
|Terminals | LAN||RJ-45 x 1 for network connection 10Base-T/100Base-TX, compatible with Art-Net, PJLink™|
|Terminals | DC Out||USB Type A x 1, for power supply (DC5 V, max 900 mA)|
|Power Cord Length||3.0 m (9 ft 10 in)|
|Cabinet Materials||Molded plastic|
|Dimensions (W x H x D)||498 x 168*4 x 481mm (19-19/32 x 6-5/8*4 x 18-15/16 in ) with supplied lens|
|Weight||Approx. 16.6kg (36.6 lbs)|
|Operation Noise||28 dB (Silent), 33 dB (Normal/Eco)|
|Operating Temperature||0-45 °C (32-113 °F) *6|
|Operating Humidity||10%-80% (no condensation) at less than 4,200 m (13,780 ft.) above sea level|
|Storage Temperature||-20°C-60°C (-4- 140 °F)|
|Note||*1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 with legs at shortest position *5 Average value. May differ depending on models *6 The operating environment temperature should be between 0°C (32°F) and 40°C (104°F) if the projector is used at an altitude between 1,400m (4,593ft) and 4,200m (13,780ft) above sea level. When the OPERATING MODE is set to [ECO] or [SILENT], the projector cannot be used at an altitude of 2,700m (8,858ft) or higher above sea level.|
|DLP™ Chip | Panel Size||17.0 mm (0.67 in) diagonal (16:10 aspect ratio)|
|DLP™ Chip | Display Method||DLP™ chip x 1, DLP™ system|
|DLP™ Chip | Pixels||2,304,000 (1920 x 1200) x 1, total of 2,304,000 pixels|
|Brightness||5,200 lumens (Center)/ 5,000 lumens|
|Technology||1-Chip DLP Laser|