1080p-compatible, high performance, Full HD Large-Venue Projector with excellent durability and low TCO (Total Cost of Ownership)
Incredible 16.000 Im of brightness
Panasonic’s unique quad-lamp system, with its new high-power UHM lamps, has helped to make the body
extremely compact while providing an astounding 16,000 lm of brightness.
Dynamic iris for a high 10,000:1* contrast ratio
Panasonic’s Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1* contrast
without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images
with more detailed textures.
* Full on/off, with dynamic iris set to “3”.
Detail clarity processor 3 gives natural clarity to even the finest details
This unique Panasonic circuit optimizes the sharpness of each image, based on the
super-high-, high-, medium-, and low-frequency components of the extracted image information. The resulting images have more natural, lifelike expression.
System daylight view 2 for enhanced color perception
This unique Panasonic technology optimizes image quality to improve the color perception of the projected image in bright rooms.
With a brightness of 16,000 lm, it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images.
DICOM simulation mode*
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
* This product is not a medical instrument. Do not use it for actual medical diagnosis.
Wave monitoring function
When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ16K projector you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer.
Advanced monitor functioning
• Fine-adjustable color temperature
• Full 10-bit image processing
• 3D color management system
• IP conversion
• Digital noise reduction
• Dynamic sharpness control
• Progressive cinema scan (3:2 pulldown)
• AI scene control
• 2:2 pulldown mode
• sRGB compatibility
- Easy lamp replacement
For easier maintenance, you can replace the lamp from the rear. This makes it easy to replace a lamp while the projector is still in the mounting bracket or dual stacked.
- Liquid cooling system attaining a high level of reliability
This new liquid cooling system directly cools the DLP™ chip to improve performance and enable operation up to 45 °C (113 °F).*
It allows quiet (48 dB) and versatile use while stabilizing performance.
It also helps to make the body compact. And the system is hermetically sealed, so you don’t need to replenish the liquid.
* The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude.
- Eco filter that needs no maintenance for up to 12,000 hours*
The Eco Filter has an electrostatic Micro Cut Filter that collects minute dust particles with an ion effect. It combines with the dust-resistant cabinet to enable long-term use even under harsh conditions. Its maintenance cycle of up to 12,000 hours reduces hassle, and the environmental design lets you wash the filter with water and reuse it.**
* The usage environment affects the filter maintenance cycle.
** When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
- Flexible installation
The wide adjustment range of the powered horizontal / vertical lens shift function can be easily adjusted with the remote control.
The unit can also be rotated 360° vertically*, to accommodate various installation conditions. The lens-centered design contributes to easy installation.
* A special fixture must be attached to the lamp case when the projector is placed at an angle within ±30°(upward/downward) of the vertical.
- A wide selection of lenses (optional)
Choose from a wide lineup of lenses for your system, including short-throw,
long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.
- Lens memory
The settings of projection size, lens shift position, and focus/zoom can be stored in memory and recalled for instant switching.
* The settings stored in memory and the projection condition after recall may not match perfectly.
- Multi-unit brightness control
This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a
multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be
increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software.”
- Multi-screen support system seamlessly connects multiple screens
The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, Color matching and Digital image enlarging.
The edges of adjacent screens can be blended and their luminance controlled.
This function corrects for slight variations in the color reproduction range of individual projectors.
Digital Image Enlarging
The PT-DZ16K features a digital zoom function that allows images to be enlarged up to 10 times (horizontally and vertically).* Up to 100 units
(10 x 10) can be edge-blended at a time to create large, multi-screen images.
* While the input resolution will not change, maintaining image quality will not be possible for those images that are enlarged horizontally and vertically via the digital zoom function.
- Backup input setting* assures reliability and optimizes performance
The Backup Input Setting* allows the signal to be switched to the backup input signal as seamlessly as possible when the input signal is disrupted.**
This function ensures high reliability and is ideal for critical control rooms, projection mapping, staging, and other applications where images should not be interrupted.
* The Backup Input Setting is possible by updating the projector's firmware to MAIN Ver. 1.04. or later.
** The combination of the primary/secondary input terminals is fixed. Use the combination of DVI-D (primary) and HDMI (secondary) terminals. The Backup Input Setting is enabled only when the input signal to the primary and secondary terminals is the same.
Note: Please contact your sales representative for information on the Backup Input Setting.
- Geometric adjustment for specially shaped screens
This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed.
- Multiple terminals
The PT-DZ16K has an array of terminals, including SDI (3G-SDI, HD-SDI and HD-SDI), DVI-D, HDMI and two RGB inputs.
Multi projector monitoring & control software
Panasonic’s original Multi Projector Monitoring & Control Software freeware lets you control and monitor multiple projectors at the same time over a wired LAN. If a problem occurs, an alarm message is sent to the monitoring/controlling PC. The terminal connection area is LED illuminated, and a backlight is provided for the control panel buttons, ensuring smooth and easy operation in the dark.
Other valuable features
• Lens lock function to secure the lens installation condition
• Mechanical lens shutter with fade in/out effect
• P-in-P function
• A Scheduling function
• Art-Net compatible
• 30m (98.4ft) long-range wireless remote control with LED backlight
• ID assignment for up to 64 units
• Control device setup function
• Built in test pattern
There are currently no key services available.
There are currently no other services available.
|Power Supply||200-240 V AC, 12 A, 50/60 Hz (3-wire single-phase)|
|Power Consumption||2,150 W (2,200 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,338 BTU (without light output: 7,127 BTU)|
|DLP™ Chip Panel Size||24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)|
|DLP™ Chip Display Method||DLP™ chip x 3 (R, G, B), DLP™ projection system|
|DLP™ Chip Pixels||2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels|
|Lens||Optional powered zoom/focus lenses|
|Lamp||420 W UHM lamps (x 4) (four lamp system)|
|Screen Size||1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70-300 inches) with the ET-D75LE5,16:9 aspect ratio|
|Brightness||16,000 lumens (four lamp)|
|Contrast||10,000:1 (full on/full off, in dynamic iris 3 mode)|
|Resolution||1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels)|
|Scanning Frequency (SDI)||3G-SDI signal(YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1080/50p, 1080/60p, 3G-SDI signal(RGB4:4:4 12bit/10bit): SMPTE ST 424 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p; Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p; SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 480i, 576i, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/25p,1080/24p, 1080/24sF, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz|
|Scanning Frequency (HDMI/DVI-D/RGB)||Horizontal: 15-100 kHz, Vertical: 24-120 Hz,dot clock: 162MHz or less (HDMI/DVI-D: 25MHz-162MHz)|
|Scanning Frequency YPBPR (YCBCR)||480i(525i): fH 15.73 kHz; fV 59.94 Hz, 576i(625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720(750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz|
|Scanning Frequency (Video/S-Video)||fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Optical Axis Shift Vertical||±60% (±50% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.|
|Optical Axis Shift Horizontal||±20% (±15% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.|
|Keystone Correction Range||Vertical ±40°, Horizontal ±15°(vertical ±40° and horizontal ±15°with the ET-DLE1/2/10/20, vertical ±22° and horizontal ±15° with the ET-D75LE5/50, vertical ±28° and horizontal ±15° with the ET-D75LE6)|
|Keystone Correction Range when Using both the Keystone and Curved Correction of the Geometric Adjustment Function||Vertical ±20°, Horizontal ±15°(vertical ±8° and horizontal ±8° with the ET-D75LE5/50, vertical ±10° and horizontal ±10° with the ET-D75LE6|
|Terminals SDI In||BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant|
|Terminals HDMI In||HDMI 19-pin x 1, Deep Color, compatible with HDCP,480i, 576i, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p; VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 -162 MHz ; NOTE: Compatible with non-interlaced signals only.|
|Terminals DVI-D In||DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 -162 MHz; NOTE: Compatible with non-interlaced signals only.|
|Terminals RGB 1 In||BNC x 5|
|Terminals RGB 1 In R, G, B||R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.|
|Terminals RGB 1 In Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals RGB 1 In S-Video Signal||Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms|
|Terminals RGB 2 In||D-sub HD 15-pin (female) x 1|
|Terminals RGB 2 In R, G, B||R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.|
|Terminals RGB 2 In YPBPR (YCBCR)||Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals Video In||BNC x 1, 1.0 Vp-p, 75 ohms|
|Terminals Serial In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals Serial Out||D-sub 9-pin (male) x 1 for link control|
|Terminals Remoter 1 In||M3 jack x 1 for wired remote control|
|Terminals Remoter 1 Out||M3 jack x 1 for link control|
|Terminals Remoter 2 In||D-sub 9-pin (female) x 1 for external control (parallel)|
|Terminals LAN||RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™ (class 1)|
|Power Cord Length||3.0 m (9 ft 10 in)|
|Cabinet Materials||Molded plastic|
|Dimensions (W x H x D)||620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)|
|Weight||Approx. 43 kg (94.8 lbs) (without lens)|
|Operation Noise||48 dB (quad lamp operation)|
|Operating Temperature||0℃- 45℃ (32℉-113℉)|
|Operating Humidity||10% - 80% (no condensation)|